Carl-goldberg GBGP0108 User Manual download pdf

Small Cradle

Arm (x2)

Guide Stick (x4)

1/4"x1/4"x4-1/2"

[6x6x115mm]

Large Cradle

Arm (x2)

Cradle (x2)

Rear Cross Bar

Front Cross Bar

Drawer Box Parts

Drawer Parts

1. Remove all the parts from their laser-cut blank sheets.

For the best ﬁ nish, take your time to cut around each part

with a hobby knife where necessary.

2. With the exception of notches and slots where the parts

ﬁ t together, sand the edges of all the parts smooth.

3. Glue the guide sticks to the large cradle arms with the

bottom of each stick even with the bottom of each arm (be

certain you have selected the large arms, not the small

arms). And it doesn’t matter which side of the arms you

glue the sticks to—there isn’t a right or a left. Optional:

Sand the sticks even with the beveled edge of the arms.

4. Use pliers to ﬂ atten the spikes in both 6-32 blind nuts.

An airplane cradle is indispensable for holding the fuselage during assembly, maintenance, or simply

while attaching the wings when you get to the ﬂ ying ﬁ eld. With its adjustable arms and cradle bases,

the Carl Goldberg Super Hold’em suits this purpose for most models up to “giant-scale.” And the

storage drawer and tool tray convert your Super Hold’em into a miniature, remote work bench for

working on your plane at the ﬁ eld. The Super Hold’em can be assembled as-is, or ﬁ nished with clear

varnish or paint. If applying a ﬁ nish, note that the parts ﬁ t is tight, so the notches in the cradle bases

and cross bars will have to be widened accordingly. This can be done with a strip of coarse sandpaper

glued to a sheet of plywood, but use care not to widen the notches too much. Otherwise, the parts will

ﬁ t loosely and the stand may not be rigid.

™

1 2 3 4

Summary of Contents

Page 1 - Guide Stick (x4)

Small CradleArm (x2)Guide Stick (x4)1/4"x1/4"x4-1/2"[6x6x115mm]Large CradleArm (x2)Cradle (x2)Rear Cross BarFront Cross BarDrawer Box P

Page 2

5. Mount a large arm and a small arm to each cradle basewith a 6-32 screw, a washer and the blind nut. 6. Optional: If you prefer the arms to rem

Page 3

10. Fit the box to the cross bars with the “tray” on top. Make certain everything is tightly pressed together and there are no gaps. Then securely g

Page 4 - SHOP AND AT THE FIELD

Comments to this Manuals

No comments

Carl-goldberg GBGP0108 User Manual

Browse online or download User Manual for Air equipment Carl-goldberg GBGP0108. Carl Goldberg GBGP0108 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Air equipment Carl-goldberg GBGP0108